From Lumenlab

By reading this document, you (the reader) agrees to not hold liable the makers of this document for any adverse effects that may come by the use of this document which includes, but is not limited to personal injury or property damage. By using the directions in this manual to make a DIY Video Projector, you agree that you have read and understand this disclaimer and have read and understood that you are soley responsible for your own safety. THERE IS NO WARRANTY EXPRESSED OR IMPLIED BY THE USAGE OF THIS DOCUMENT.

Copyright Warning

These materials are the sole copyright of Lumenlab.com, and are protected by U.S. and international copyright law. We track all documents sold through our organization and log IP addresses, Names and Addresses.

ESD Warning

Lcd panels and micro circuitry are subject to damage by *electrostatic discharge*. Before handling or working with electronics the user should be properly grounded. A grounding strap and mat is recommended, (available from Radio Shack).

Lamp Warning

The lamps used in this project can not be turned off and restarted immediately. They generally have a hot restrike time of several minutes. Please observe all safety precautions on the lamp packaging.

Have fun!

Continue on to Introduction.